S-Chassis AN Conversion Fittings - Power Steering Rack

(No reviews yet) Write a Review
Adding to cart… The item has been added

***Fittings are for Off Road Use Only****

These fittings are designed specifically for the S-Chassis power steering rack, but may work with other racks as well.

Power Steering Rack Fittings fit S12, S13, S14, S15 and certain RX-7.

DISCLAIMER: Some FC Models have different steering racks and fitting sizes. Please confirm if you have 16 x 1.5 and 14 x 1.5mm fittings before purchase.

Some FC RX-7 racks use a 12 x 1.25 fitting which we do not currently have. FC RX-7 FITTINGS ARE PURCHASED AT YOUR OWN RISK. REFUNDS WILL ONLY BE GIVEN FOR: Damaged in shipping/manufacturing or incorrect part sent.

Our fittings are built to EXACT depth, width, and O-ring positions as OEM fittings, and provide superior flow, as well as leak protection, over most AN conversion line kits.

Standard conversion fittings don't thread deep enough into the S-Chassis rack, and so the O-ring doesn't get a chance to seal correctly. Ours solves this issue.

A set of fittings comes with:
One (1) - 14 x 1.5mm to -6AN fitting
One (1) - 16 x 1.5mm to -6AN fitting

All sets of fittings come with high grade Vitron/FKM O-rings that are superior to standard O-rings, and will last longer.

Fittings are made of steel with a zinc coating, and produced locally in the USA.

"I bought a set of these....I was able to directly compare these to both the fittings that came with my AN line conversion kit, as well as the stock fittings. These are built to the same depth, width, and o-ring seating position as the OEM fittings, the fittings from my line kit I wouldn't even consider using after I saw these. My rack has not leaked a drop of fluid since I installed these!" - Omid 

Will work with most power steering conversion kits but correct line sizing and line fittings are needed. Please confirm the size of the fittings for the kit you plan to use before purchase.